Maintenance Checklist For Spring

With spring just around the corner, it is time to consider the condition of your HVAC system. When was the last time a technician had a look at the workings? When was the last time your heating unit was tuned-up? If the answer is, before Thanksgiving, it is time to call a technician who will go through the maintenance checklist and find out where your HVAC unit stands.

What will the technician check?

  • Filters: He will remove and clean your filters. If there’s too much debris that can’t be removed, he will recommend replacing the filters. Ideally, the filter should be cleaned every 2-3 months.
  • Electrical connections: Checking electrical wires is a must during inspections. Exposed wires can easily shock you while touching the unit. They can also lead to more serious problems like power failure or short circuits.
  • Evaporator and condenser coils: Evaporator and condenser coils can get cracked or broken because of regular wear-and-tear. Additionally, these can also get clogged with dust because of irregular cleaning. Clogged coils reduce your unit’s lifespan and increase electricity bills.
  • Thermostat: Inspecting thermostats is a must because a problem in the thermostat can rapidly increase your home’s chances of overheating or under heating.
  • Oiling: To keep all moving parts moving smoothly, they require oiling. Without lubricant, these parts can suffer damage as a result of repeated friction.
  • Connections: Gas, oil, and burner connections should be checked often to prevent fire hazards. An incorrect or broken connection in either of them can be a health hazard and can cause fires or gas poisoning.

What happens if you don’t call a technician?

While calling a technician for issues is always recommended, many people often choose DIYS. While these seem cost-effective, they can cause a lot of damage in the long run. Without a professional to provide you with heating service in Fort Worth, you can have a myriad of problems. Here are the most common problems you’ll suffer if you don’t call a technician:

  • Health issues

When a filter isn’t cleaned regularly, it becomes clogged with dust and is a ground for bacteria and germs. These then spew out every time you turn on the unit. This can easily lead to health issues like fevers and colds, increased allergic reactions, and even breathing problems.

  • Electricity issues

If electrical connections inside the unit aren’t checked regularly, they can easily become broken. It can lead to short circuits, unit breakdowns or can shock you when you touch the unit. In the long run, the unit will have reduced efficiency, which will reflect in your electricity bill.

  • Further HVAC issues

Skimping on maintenance or avoiding it completely is problematic because of one main reason: you’ll have to do it at some point. The longer you postpone calling a technician, the more problems you’ll end up with. This means higher costs that can eventually lead to your HVAC unit having a shorter lifespan.

For residents of Fort Worth, we at NSG Heating and Air Specialists, LLC, are at your service. We’re a professional HVAC service that is completely customer-centric. We provide excellent heating service in Fort Worth that is affordable and budget-friendly.

All You Want To Know About HVAC Installation

If you want to air-condition more rooms, you need more ductwork, ultimately increasing the expenses.

  • Local climate

Consider the local temperature while installing the HVAC system, as some systems may work for other places but may not work at your place. Like the heat pump may not work in extremely cold temperatures.

  • The available warranties

Everyone gets fascinated by the warranties, and I’m sure so do you. The manufacturers that provide longer warranty periods attract more buyers. 

An HVAC system is very economical – it proves to be effective in taking care of the airflow in the house while maintaining perfect humidity. If you think you need HVAC installation in Fort Worth, consult NSG Heating and Air Specialists, LLC to determine the system that’s best for your situation. 

Our Services

  • Ac/ Furnace/ heat pump/ Ventilation Installation
  • Ac/ Furnace/ heat pump Replacement
  • Ac/ Furnace/ heat pump Maintenance
  • Ac /Furnace/ heat pump Repair
  • HVAC zoning
  • Ductless services
  • Indoor Air Quality

Why Choose us?

  • Emergency services: If you require a repair or replacement urgently, contact the emergency numbers of NSG Heating and Air Specialists, LLC for faster repairs. The company technicians are available throughout the day.
  • Certified technicians: All the technicians are trained and certified, so you can rest assured that you are putting your ductless heating and cooling project in the right hands. The technicians are highly experienced in HVAC installation in Fort Worth.
  • Customer satisfaction: NSG Heating and Air Specialists, LLC is renowned for HVAC Installation in Fort Worth. The team strives to work hard and serve our customers with practical solutions. 

Everyone is well aware of the HVAC system, which stands for heating, ventilation, air-conditioning. The system consists of furnaces, heat pumps, air-conditioners, ducts, thermostats, and many more devices responsible for both heating and cooling of your house. It is achieved by controlling the temperature and humidity level in that environment by controlling the movement’s movement and distribution inside the room.

Major pieces of equipment used in an HVAC system are: 

  • Furnace

A furnace heats houses and buildings by burning fuel or circulating hot water. It can be of three types- single-stage, two-stage and modulating.

The furnace transfers heat to the building’s living space through an intermediary distribution system, but now the air convection heating system has been in vogue for a century.

  • Air-conditioner

An air-conditioner removes heat and humidity from the inside and dispenses it outside. Air-conditioning units are of many types-window units and packaged terminal, split system, Air-only central air conditioning, Central plant cooling, and portable units.

  • Heat Pump

A heat pump reverses energy transfer from warmer spaces to colder ones, thus making it possible to transfer heat from colder places to warmer ones. This is done with the help of external energy like electricity.

But this system has the disadvantage that it has difficulties in operating in cold weather, thus can be used at places coming under mild-cold zones.

How much can an HVAC system cost?

Prices of an HVAC system can vary from place to place and depend on multiple factors like the brand and model you choose and even the size of your home and ductwork. Thus, you should contact professionals for proper evaluation and estimation.

When you are looking to install an HVAC system, it is important to consider certain factors to ensure that you select the most appropriate one. These factors include:

  • The age and size of your home

No one wants to invest in older things, even in older houses. If you want to install an HVAC system in an older house, keep your expenses low. Also, the house’s size matters while installing the system, as a larger house needs a larger and more efficient system than the smaller one.

Service! Before It’s Too Late

Winters in Fort Worth are often freezing and harsh. To protect yourself and your family from the cold, snowy weather, you must get all the necessary servicing and maintenance of heating systems done beforehand. Usually servicing is done in the fall, as heaters are shut for a long period. You might face various problems if you do not do the routine maintenance and servicing of your heating systems. 

Perks of carrying out the servicing of a heater

  • Extended Life of Equipment

Seasonal maintenance of your heating system helps to prolong the life of your equipment. Professionals inspect, clean, fix tiny issues in your heater before it becomes more difficult to fix. 

  • Better Air Quality

With good maintenance work, cleaning of clogged air filters, dust on the surface, and dirty system components in your heating system, professionals help you boost your home’s air quality. Your filter can trap common allergens that plague your home, including dust particles, pollen, and pet dander. Getting a quick furnace service can help you breathe better.

  • Savings on repeated Repairs

HVAC experts always suggest hiring skilled technicians for heating service in Fort Worth as preventive maintenance can help you save the money you later invest in repair services. Usually, with annual maintenance or tune-ups by professionals, you can get a 100% service guarantee. 

  • Better Comfort & Safety

You’ll always have better indoor air quality if your heater is running suitably. It is less likely that your heating equipment will start to malfunction if you get it installed or repaired by a qualified technician. There will be no stress of a fire breaking out or excessive carbon dioxide coming out of the clogged air filters. So it’s better to hire an expert and feel a lot safer.

There can even be no physical appearance of any unusual thing in the heater. However, it may still be on the verge of failure; that is why one needs professional technicians to look into your heating system’s situation. NSG Heating and Air Specialists, LLC provides you with the experts trained for this endeavor. The organization is known for its reliability and prompt service and provides a full suite of services with all your HVAC needs covered.

Our Services

  • Ac/ Furnace/ heat pump/ Ventilation Service
  • Ac/ Furnace/ heat pump/ Ventilation Installation
  • Ac /Furnace/ heat pump Repair
  • Ac/ Furnace/ heat pump Maintenance
  • Ac/ Furnace/ heat pump Replacement
  • HVAC zoning
  • Ductless services
  • Energy-Efficiency
  • Indoor Air Quality

Why choose us?

  • Customer satisfaction: The team strives to work hard and serve our customers with practical solutions. They have also gathered an expertise in the industry through years and years of practice.
  • Emergency repairs: The enterprise provides the customers with emergency services such as urgent. Our workers are ready to assist you at any time of the day. For emergency services, technicians can be booked through a phone call or on the website.
  • Extensive Range of Services: Apart from the general HVAC services, the company also offers a wide range of other services such as air duct cleaning, indoor air quality facilities, furnaces, and home performance/energy efficiency testing.

Affordable prices: The licensed heating service contractors work at competitive and budget-friendly prices so that you can take the assistance anytime without any hesitation.

Furnace Maintenance Tips

Winter is finally here. Before it hits in full force, prepare your furnace for the heating season. There are several benefits of caring for your furnace in winter. A well-maintained furnace works efficiently, is less prone to breakdowns, and does not need frequent repairs.

Proper maintenance is necessary to keep furnace parts in working condition. Inadequate or lack of care can lead to dangerous situations, health problems, and system breakdown.

Here are some ways to maintain your furnace in winter.

Maintain Your Thermostat    

If you are still using a manual thermostat, switch to a programmable model. Well-equipped with features, a programmable thermostat can save you a ton of money and take some pressure off of your furnace.

Like every other household appliance, thermostats need regular maintenance. Clean your thermostat regularly and get it inspected for frayed wires. Make sure the wires are tight and properly fitted. Check batteries regularly. To get the most out of your thermostat, set it 5-10 degrees lower when you are not at home.

Clean the Flame Sensor 

Your gas furnace’s flame sensor permits the flow of current when it senses the presence of a flame. Over time, dust and dirt can accumulate on a sensor, preventing it from working correctly.

Clean your flame sensor at least once a year. To clean your flame sensor, unscrew it from the furnace. Holding the sensor at the bottom, clean its body gently with an emery cloth. Once you have removed loose debris and dirt, remount the sensor on the burner assembly.

Replace Furnace Filters Regularly 

Over time, furnace filters get clogged with contaminants such as dander, dust, dirt, and pollen in the air that passes through them. A clogged filter can restrict airflow, putting additional strain on the fan motor, causing your system to overheat and ultimately break down.

Clogged filters can negatively impact your indoor air quality. They will make your furnace work harder, draw more electricity, and can break down anytime.

By replacing a clogged filter, you can lower your electricity bill by 10-15 percent. Replace filters every three months. If you or someone in your family has a seasonal allergy or an elderly parent at home, change filters more frequently.

Clean Your Furnace Regularly  

To prevent dirt and dust from settling on different parts of your furnace, clean the inner components. First, use a soft-tipped paintbrush to loosen dirt and debris. Once you have successfully dislodged dirt particles, vacuum the internal components.

Need furnace repair services in Fort Worth, TX? Look no further than NSG Heating and Air Specialists. We are committed to helping homeowners get the most out of their HVAC systems. To schedule a pre-winter furnace tune-up, call 817-9934822. 

5 Essential Tips to Maintain Your HVAC System

Nothing is more detrimental to the health of your HVAC system than skipping annual maintenance services. If your heating and cooling system are operating well and providing you the desired comfort, it still needs maintenance to keep functioning that way. Otherwise, a neglected HVAC system is like a ticking time bomb, prone to premature breakdown and costly repairs.

It is also essential that you have these services performed by an HVAC contractor. Professional services ensure the best results, help maintain the warranty provisions, and offer a repair guarantee. If a service technician spots a problem during the maintenance process, they nip it in the bud.

Here are a few tips you can follow to maintain your HVAC system if help is not available. If that’s not the case, we suggest that you opt for professional services.

Air Filters

Clean air filters have two benefits. First, it ensures that the air entering your home is healthy. Secondly, it allows unrestricted flow of air, minimizing the pressure on your HVAC system.  So if your air filters are clogged, change them. Experts advise replacing the air filters at least once in three months. If you have pets at home, consider changing them once every month.

Condensing Unit

Clean outdoor units are integral for the effective functioning of your HVAC system.  The outdoor air conditioning unit help in dispersing heat in summer with the fan’s help due to dirt and grime.

These metal fins are very delicate and can bend if too much pressure is applied while cleaning. Spray the outdoor unit with a water hose to clean the fan. If left neglected, the dirty fan will be inefficient and lead to overheating of your HVAC unit.

Drain Pipe & Drain Pan

Dirty drain pipe and pan can lead to the growth of algae and mold. Therefore, it needs regular cleaning. If you are not aware of a drainpipe, consider taking help from a service technician because it is always better to be safe than sorry. They’ll use wet-dry vacuum suction to clear the clogged areas and use bleach to clean the drain.

Maintenance Services

We cannot stress enough the importance of HVAC maintenance services. Availing of these services is similar to fueling up your car for a long journey. You want it to function uninterruptedly without causing any efficiency issues in scorching summers or chilly winters.

If you are the one who procrastinates service calls, HVAC contractors offer lucrative maintenance service plans that save your time, money, and efforts. The services take place twice every year – spring and fall. Check out our HVAC maintenance plans right now!

For best HVAC maintenance results, always rely on qualified contractors. NSG Heating and Air Specialists, LLC, one of the best HVAC companies in Fort Worth, TX, offers qualitative and hassle-free services to customers.

Call (817) 9934822 to request a service estimate. Our certified technicians will provide you customized services for the best results. We are available on call and texts 24/7.

How to Protect and Maintain Your Heat Pump at Home

Heat pumps are gradually becoming popular in American households. They are safer than combustion-based HVAC systems, easy to maintain, and help you to save energy. If you have a central heating and cooling system, then it probably comprises a heat pump. It operates by pushing the heat that’s already present in your surroundings.

A heat pump requires proper maintenance. A homeowner should schedule maintenance twice a year to keep their heater functional. A neglected heat pump also utilizes 10-25 percent more energy than a maintained unit.

Only an HVAC technician should service the heat pump. They offer a professional guarantee, help preserve the manufacturer’s warranty, and prevent the unit’s premature breakdown. Here a few tips that will help protect your heat pump and extract maximum value from it.

Basic Heat Pump Maintenance

Simply observing your heat pump and spotting the early warning signs can save you a lot of problems. No one wants to be abandoned by their heat pump when they need it the most. Therefore, open your manufacturer’s maintenance guide and get started with these necessary steps to keep your heat pump efficient.

Air filters: Start by inspecting and cleaning the air filters because clogged filters are the biggest enemy of your system. They should be cleaned once and month and replaced every three months. Dirt can significantly reduce the efficiency of your system and put it through unnecessary strain.

Inspect fan: Closely observe the fan of the unit and check if the fins are bent. Carefully straighten them without applying much pressure. Similarly, clean the accumulated dirt on the fan to make it run smoothly. A dirty fan can affect your system as a whole. If you are not sure about cleaning it yourself, don’t hesitate to rely on trained HVAC technicians. They can make the process easy and also give the best results.

Prevent Excess Build-up Elements

Conduct a regular inspection of your heat pump, especially after bad weather. In winters, it is prone to excessive build-up of snow, which can harm the unit’s efficiency as a whole. In the fall, there can be a build-up of twigs and leaves. Your heating and cooling unit function best when it’s clean and unobstructed.

If you find ice build-up on the heat pump, try pouring warm water after turning off the heating system. Similarly, if you have lots of plants and trees around your outdoor unit, it can clog the heat pump, restricting the unit’s capacity to run effectively. Make sure you plant all the trees and shrubs at least a meter away from your HVAC unit.  Whenever you mow the lawn, keep the mower away from the heat pump.

Be Careful of the Unit Placement

The majority of the time, homeowners think installing the best heat pump will give them the best results. They forget the importance of correct installation, required maintenance, and other factors like the unit’s placement.

You must not directly locate your unit under a leaky gutter or around any other source of dripping water. Otherwise, water can freeze and prevent your heating system from providing the desired heating or cooling.

Always choose an elevated area for installing the heat pump, at least four inches off the ground. It allows a good passage for drainage and prevents the accumulation of water. You can always get in touch with an HVAC technician near you for suggestions on the heating unit placement.

Seek Professional Help

No one can take care of your heat pump like professional HVAC contractors. The service technicians inspect every component of your system and the factors that affect its functioning. They deep clean it, lubricate the moving parts, and tighten loose electric connections. Heat pump maintenance is a preventive process that leaves you tension free throughout the year.

The maintenance services prevent last-minute repairs that will probably cost you more. Not only this, they answer all our queries related to the system and offer pro tips that prolong the lifespan of your heat pump.

If you find scheduling heating and cooling services a hassle, you can always rely on cost-effective maintenance plans. These preventive packages help you schedule heat pump maintenance twice a year – spring and fall. You can avail the discounts and be on the HVAC contractor’s priority list if you need urgent heat pump repair services.

When it comes to trusting an HVAC contractor with your expensive heat pumps, always rely on licensed and certified technicians. At NSG Heating and Air Specialists, LLC, our technicians specialize in heat pump maintenance, tune-up, installation, and repair. If you require a heat pump repair in Fort Worth, TX, call (817) 9934822 right away.